Off Road Tuning

Equipment Tuning · Kubota · Takeuchi · Bobcat

Stop fighting
your factory
tune.

Custom ECU tunes for skid steers, track loaders, and compact equipment. More usable power. Faster cycle times. Better hydraulic response. Real performance from real diesel specialists.

Shop Equipment Tunes Why tune your machine
⚙
Kubota · Takeuchi · Bobcat
⬢
Built for Work Machines
★
Any Equipment
▲
Direct Flash or Send-In
01 · Why Tune

Factory tunes are
conservative on purpose.

Manufacturers tune for the lowest common denominator: emissions compliance, warranty protection, and a one-size-fits-all duty cycle. If you're using your machine hard, you're leaving real performance on the table.

— BENEFIT 01

More usable power

Pull harder, lift heavier, push through tougher material without the engine bogging or hitting the soft limiter early.

— BENEFIT 02

Faster cycle times

Snappier hydraulic response means more load cycles per hour. On long jobs, that's real money back in your pocket.

— BENEFIT 03

Better lift capacity

Under heavy loads, machines often run out of hydraulic pressure before mechanical capacity. We unlock what's already there.

— BENEFIT 04

Improved efficiency

A machine that completes a task faster, with less engine strain, often burns less fuel per cubic yard moved. Win on both sides.

02 · Equipment We Tune

Supported machines.

The brands and models below are our specialty. Don't see your machine? Contact us — we tune more than what's listed. John Deere, Case, Volvo and more...

Kubota
Skid Steers · Track Loaders · Tractors
  • SVL75-2 · SVL75-3
  • SVL95-2s · SVL97-2
  • SSV65 · SSV75
  • Compact tractors
  • Industrial engines
Takeuchi
Track Loaders · Compact Excavators
  • TL8 · TL10 · TL12
  • TL230 · TL240
  • TB Series excavators
  • TS Series skid steers
  • Fleet & custom builds
Bobcat
Skid Steers · Track Loaders
  • T550 · T590 · T650
  • T770 · T870
  • S550 · S570 · S630
  • S650 · S750 · S770
  • Compact loaders
15+
Years Tuning Diesels
30
Equipment Brands
140+
Supported Models
7d
Support Availability
03 · The Process

Custom equipment tuning,
three steps.

Skid steers and track loaders aren't trucks. The tuning approach is different, and we built our process around how operators actually use these machines.

01

Tell us your machine

Make, model, year, hours, intended use. Construction, snow removal, landscaping, farming — each duty cycle informs the tune we build.

02

We build the tune

Custom-calibrated for your machine and how you use it. Respects mechanical limits, hydraulic safety pressures, and cooling system capacity.

03

Flash on-site or send-in

Two options: direct flash via OBD on machines that support it, or send-in ECU service. Either way, most equipment tunes complete within 3-5 business days.

04 · What's Included

Built for working machines.

✓
Duty-cycle calibration Tuned for how you actually use the machine — not a generic file.
✓
Hydraulic response tuning Faster cycle times, snappier boom and bucket response under load.
✓
Power gains within safe limits We respect mechanical and cooling limits. Tunes built for sustained work.
✓
Fleet pricing available Multiple machines? We offer volume discounts on fleets of 3+.
✓
Direct specialist support Tuning for off-road equipment is a niche — we're one of the few who actually do it well.
05 · From Real Operators

What operators
say about us.

★★★★★

"Tuned my SVL95 for landscaping work. Cycle times noticeably faster, the machine pulls harder up grades with a full bucket. Stopped fighting the soft limiter on cold mornings. Worth every dollar."

Tom S.
Kubota SVL95-2s · Landscaping
★★★★★

"Have a small fleet of TL12s and TL10s on construction sites. Stealth tuned all of them on fleet pricing. Operators say they all feel like new machines — that alone is gold."

Devin H.
Takeuchi Fleet · Site Work
★★★★★

"T770 was bogging on the snow plow attachment in heavy wet snow. After the tune, it pushes through like a different machine. Stealth knew exactly what to ask about my use case. Highly recommend."

Mark D.
Bobcat T770 · Snow Removal
06 · Frequently Asked

Questions answered.

Factory tunes are conservative on purpose — manufacturers tune for the worst-case operator and the most restrictive emissions regulations. A custom tune unlocks usable power, faster hydraulic response, and better fuel efficiency when you're actually working the machine hard.
No, when done right. Our equipment tunes respect mechanical limits, hydraulic safety pressures, and cooling system capacity. We tune for sustained work, not dyno numbers. The goal is a machine that works harder for longer — not one that fails early.
Two options depending on your machine: direct flash via OBD on machines that support it, or send-in ECU service where you ship us the ECU, we flash it, and ship it back within 48 hours. We'll tell you which option applies when you order.
Yes — Kubota, Takeuchi, and Bobcat are our specialty but we tune many other compact equipment platforms. Contact us with your make and model and we'll let you know.
Fleet pricing is available for 3+ machines. We can also coordinate scheduling so your downtime is staggered. Contact us for a fleet quote.
It varies by machine, but most operators report a noticeable improvement in both raw power and response. 10-20% power increase is average. We're tuning for usable work output, not bench-test numbers.
3-5 business days from order to delivered tune for most equipment. Send-in ECU service adds 1-2 days for shipping each way. Fleet jobs are scheduled to minimize your downtime.

Stop fighting your
machine.

Get the performance and efficiency you paid for. Order today, get your custom tune within a week, and feel the difference on the next job.

Shop Equipment Tunes